Natural Fiber Carpet

Natural fibers used with carpet are created either by insects, animals, or even plants. The fibers that are created by insects or animals are called protein fibers. The ones who are created by plants are known as seeds. Vegetable and protein fibers share the common disadvantage that they are both very absorbent and may have extended drying times when wet cleaned – which can lead to mildew, shrinkage, as well as dry rot.


Wool fiber is produced from the fleece of lambs or sheep. Wool of carpet is imported from countries including England, Australia, and New Zealand. Wool is the oldest and considered to be the finest of carpet material.

The capability of yarn to stretch up to 40% of its original length and the fact that it can be bent back and forth over 180,000 times without breaking makes it very resilient. Wool is the most expensive material for carpet, although it’s also the best that you can purchase.


The fiber of silk is produced by the larva of various insects called silk worms. The silk, in continuous lengths from 300 to 1600 yards is spun to generate the cocoons. As a fiber, silk is naturally non flammable, strong, and not affected by static control problems – even in low temperatures. Go over in order to learn further details about how to clean carpet at home.

Cellulose fiber

This type of fiber is produced by crops and normally used as face yarns. These kinds will however, appear as backing materials of tufted too as rugs which were woven.


Cotton is a vegetable seed fiber that is created from the plant. The primary use for this particular fiber is yarns woven in carpet or rugs. Cotton is more resistant to alkaline solutions and becomes more powerful when it’s wet.

The greatest drawbacks to cotton is the fact that is the most absorbent of fibers and needs prolonged drying times after being wet cleaned. It is also easily damaged by acids, stains readily, mats , soils immediately, and is susceptible to mildew,

dry rot, and shrinkage.


The fiber of jute is created by the jute plant which grows in South America, Pakistan, and even in India. The stalk of the jute plant is where the longer coarse fibers are got, found between the outer bark and within the interior pulp.

Jute is generally used as weft yarns, across the breadth, in woven rugs and as a backing material in the construction of tufted carpets. Jute is an inexpensive substance which also serves other uses than just carpet. Like all other fibers, this one

Has disadvantages too. The fiber is weak when it becomes wet and is also susceptible to dry rot, shrinkage, and mildew.


The fiber of sisal is produced by the leaves of the agave plant. Sisal is extremely strong and primarily used for creating rugs, sacking, rope, and even carpet. The fiber stains readily and is also very hard to clean. Wet cleaning can also cause shrinkage so its better to use low moisture procedures.


There’s quite a bit of confusion about rayon and it’s not difficult to know why. Rayon is a synthetic fiber that is created from natural cellulosic fibers of wood pulp or cotton. The substance is set through several chemical treatments which help turn it into a synthetic fiber.

Primarily, rayon is used for rugs due to its own silk like appearance. It can be damaged by radicals, has reduced resistance to abrasion and can also be prone to cellulose browning.

Leave A Comment...